Portable gas analyser Delta 65-S
NEW GENERATION OF MRU GAS ANALYSERS!!!
Device Type: Portable
Measurements: O2 / CO / NO / Temperature / Differ. pressure
MSM technology - replacement of sensors in "field" conditions
Micro-SD card for saving measurements in EXCEL format.
USB for connecting to a PC and charging from the network.
Touchscreen color screen (intuitive navigation through the menu).
Very light: about 400g.
Ready-to-work kit "PROFI" in the case:
O2, CO (10.000ppm), thrust-pressure, diff. pressure, T of gas, leak test, memory of 1,000 measurements + Micro SD card (4GB) with adapter, AC adapter, battery, spare reusable filter, probe 250mm.
With the possibility of retrofitting:
▪ NOx sensor,
▪ high-speed thermal printer
▪ bluetooth module
The following options are available for ordering:
1. A set PROFI (O2 + CO)
2. A set PROFI (O2 + CO + NO)
3. A set PROFI (O2 + CO + Printer)
4. A set PROFI (O2 + CO + NO + Printer)
MRU DELTA 65-S - THE BEST CHOICE FOR THE OPERATOR!
Suitable for "cottages" and for industrial boilers
The MRU company (Germany) presents a universal high-tech gas analyzer
Number of gas channels at the same time |
||||||
О2 |
СО |
NO(NOx) |
Printer |
°C |
ΔP |
|
3 |
B |
B |
O |
О |
B |
B |
B basic supply | O option
Domestic boilers and stoves:
Use the "PROFI" kit in the case: the kit with 2 basic sensors (O2 and CO) is perfect for monitoring and setting up all types of burners, furnaces, boilers, among them condensing.
Industrial boilers and furnaces:
Use the "PROFI" kit in the acse + NOx 3rd sensor (option).
In DELTA 65-S you can install the 3rd NOx sensor !!! (Both at purchase, and later, if necessary).
New MSM sensor technology:
Using pre-calibrated sensors (MSM technology) saves time for servicing.
Convenience in work:
A simple intuitive menu and touch screen allow you to hold and operate the analyzer with one hand, including gloves.
Memory and interfaces:
Supplied in the basic package:
▪ memory for 1,000 measurements
▪ micro SD card (4GB) with the possibility of processing in EXCEL format
▪ IR port for high-speed thermal printer.
▪ The mini USB port provides a wide choice for transferring, storing and processing data.
▪ You can order the bluetooth module (optional) to transfer data to your smartphone
Main features:
• 2 or 3 gas analyzer O2, CO, NOx
• Resistance to overloads due to chemical underfire: Sensor measuring range CO 0 - 10.000 ppm
• Color touch screen with bright backlight and intuitive interface
• Calculation of heat engineering parameters: СО2, Alpha, loss, efficiency, dew point
• Measurement of draft, pressure, diff. pressures
• Temperature measurement (2 channels)
• At least 10 standard and 4 individual fuels
• Li-Ion battery for 10 hours of operation
• Built-in memory for 1,000 measurements
• Built-in micro SD card (4 GB) for data storage and transfer (adapter included)
• All modern data transfer interfaces:
• USB, micro SD card, Bluetooth (optional) IR port for high-speed thermal printer
|
All possible interfaces for data storage and transmission:
|
|
Fully dismountable condensate collector with reusable Teflon filter |
|
Reliable fixation on the steel surface with 4 powerful built-in magnets |
|
Simplicity in operation with a color screen and bright backlight will intuitively guide you through all the measuring programs of the analyzer |
|
Rapid replacement of the sensor by the user with the new MSM technology |
|
High speed thermal printer MRU with IR interface |
|
|
|
|
Official specifications:
Measured components: |
Range: |
Error: |
Oxygen O2 (basic sensor) |
0 ... 21,0 об% абс., resolution 0,1 % |
± 0,2 об% (abs.) |
Carbon monoxide CO (Basic sensor) |
0 ... 10.000 ppm, resolution 1 ppm |
±20 ppm < 400 ppm, |
Nitric oxide NO |
0 ... 4.000 ppm |
±10 ppm < 100 ppm, |
Flue gas temperature |
To +650°C (optionally to +1200°C), |
±1°C ...< 200 °C, |
Differential temperature |
-40°C…+1200°C, resolution 0,1°C |
± 1 °C or 0,5 % |
Ambient temperature |
0 ... 100 °C, resolution 0,1 °C |
± 1 °C |
Combustion air temperature |
0 ... 100 °C, resolution 0,1 °C |
± 1 °C |
Thrust |
± 50 HPа, resolution 0,01 гПа |
± 0,02 HPа (mbar) |
Differential pressure |
± 100 HPа (mbar), resolution 0,01 HPа |
± 0,02 HPа (mbar) |
Additional measurements Calculated parameters |
CO in air, Leak test CO2, loss, combustion efficiency, dew point |
|
Calculated parameters |
Depending on the type of fuel |
|
Types of fuel |
Natural gas, associated gas, propane, butane, diesel, fuel oil, wood, pellets, coal, and others |
|
Carbon dioxide CO2 |
0 ...20 % |
|
Dew point |
°C, resolution 0,1 С |
|
Losses of qA |
0 ... 99,9 %, resolution 0,1 % |
|
Combustion efficiency |
0 ... 120 %, resolution 0,1 % |
|
Excess of air |
1 ... 9,99 %, resolution 0,01 % |
|
General technical specifications |
||
Gas sampling probe |
Probe length x 250mm x Ø8 (650 ° C) with measurement of gas temperature and draft in the chimney |
|
Working temperature |
+ 5 ° C ... + 45 ° C, RH not more than 95%, without condensation |
|
Storage temperature |
- 20 ... + 50 ° C |
|
Memory |
1,000 measurements + micro SD card (4 GB) with adapter |
|
Interfaces |
Standard: Mini USB, Micro SD card with adapter, IR port Optional: Bluetooth ™ (data transfer to a smartphone, or to a PC) |
|
Internal power supply |
Built-in Li-Ion battery for 10 hours of operation |
|
External power supply |
The network adapter is 100 ... 240 V / 50 Hz or from USB (included) |
|
Protection class |
IP 40 |
|
Weight |
About 400 grams |
|
Dimensions |
(W x H x D) 82 x 169 x 44 mm |
Our projects
Useful
Reviews
Head count
-
Как Вам наш сайт ENGLISH?
Нравиться 0 (%) Не нравиться 0 (%) Воздержусь 0 (%)