Portable flue gas analyzer Testo 350

Testo 350 is a flexible, portable measuring system for a broad range of combustion applications.

This advanced analyser can be used to

• adjust all types of industrial burners

• measure concentrations in raw and clean gas over a longer time period

• check the atmospheres of all types of process furnaces

• maintain stationary motors such as modular cogeneration stations

• check gas pressures and gas velocities in flue gas and/or fresh air ducts.

The TESTO 350 analyzer unit is designed to control flue gases and can measure O2 (factory setting) and the concentration of the following gases: CO, COlow, NO, NOlow, NO2, SO2, H2S, CH, CO2 (by a separate IR sensor or by calculation) , Calculation of NOX, as well as the flow rate of off-gas (using Pitot tubes), EFFICIENCY, thrust / pressure, built-in differential pressure measurement, trigger input, USB output, probe connection terminals for temperature measurement (K-type NiCr-Ni and type S Pt10Rh-Pt).

The TESTO 350 control unit is designed to control the measuring system and display measurement data. The unit can be removed from the analyzer unit and retrofitted with a lithium-ion battery. All settings are made using the arrow buttons. The measurement results are displayed on a color graphic display. Due to the built-in memory, the measurement data can be transferred from the analyzer block to the control unit. If necessary, with the help of one control unit, it is possible to control several analyzer units with an optimal level of convenience.

• The possibility to control the analyzer unit and transmit measurement data even in cases where control is performed from a distant point from the chimney, which is especially useful for measurements, for example, on industrial burners.

• The possibility of transferring measurement data from the analyzer unit to the control unit allows to remove the control unit from the analyzer block and transfer it to another location in order to analyze the received data, while the analyzer unit remains in the same place to continue the measurements.

In order to protect the display of the Testo 350 control unit from damage during long-term measurements or during the transport of the analyzer from one object to another, the control unit can be mounted face down in the analyzer unit.

Подробнее о товаре

Количество: Добавить в заказ Запрос цены